How to Reset a Tire Pressure Light

After you’ve inflated your tires, you might notice your tire pressure light is still on. As a result, you might be wondering how to reset your tire pressure light. Your vehicle’s tire pressure monitoring system (TPMS) is critical to your safety around Grand Island and beyond. If you have an issue with your TPMS light being on, there’s one place to turn. Find out how to deal with a flashing tire pressure light with the team at Midway Chrysler Dodge Jeep Ram. Learn more below and explore our service specials before scheduling your next appointment!

Resetting Your Tire Pressure Light

Once you’ve finished inflating your tires, your tire pressure light should turn off. If your TPMS light stays on, there are several actions you can take:

• Drive around Hastings at or above 50 mph for ten minutes. This will reset your sensor the next time you turn on your vehicle.
• If the vehicle is off, turn the key to the “On” position, but don’t start the car. Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start it up and wait 20 minutes for the sensor to refresh. The tire pressure monitor reset button is usually located beneath the steering wheel. If you can’t find it, check the owner’s manual.
• Inflate all tires to 3 PSI over your recommended amount, then deflate them completely. Be sure to include the spare tire, as it might also have a sensor. Once they’re all deflated, inflate to the recommended tire pressure.  
• With the vehicle off, disconnect the positive battery cable with a wrench. Turn the car on and honk the horn for three seconds. This will discharge any power still stored in the vehicle. Then reconnect the battery. 

What Does a Flashing Tire Pressure Light Mean?

Tire pressure sensors often use a battery, and a flashing tire pressure light is a sign your battery needs replacing. It could also indicate a potential problem with one of the sensors. No matter what, schedule service with our Lexington-area team at Midway Chrysler Dodge Jeep Ram. We can diagnose the problem and get you back on the road safely. 

Manage All Your Tire Needs at Midway Chrysler Dodge Jeep Ram Today!

If your TPMS light says on, the easiest way to figure out why this is happening is by scheduling a service appointment with us! At Midway Chrysler Dodge Jeep Ram, we’re here to help keep your vehicle at peak performance around Grand Island. Beyond learning how to reset your tire pressure light, turn to our collision center when you need more extensive repairs. If you want to undertake car detailing, you can do so with our experienced technicians. Manage your vehicle’s service needs in Kearney with Midway Chrysler Dodge Jeep Ram!